Wizards Turbo Cut™

Size: 32oz

Features:

• Fast cut on dead paint, gelcoat and fiberglass.

• Removes 1200 grit or finer sand scratches.

• High gloss finishing on fresh or aged, single stage paint and clear coat.

• No wax, silicone or crystalline silica.

• Non-greasy, water-based for easy clean up without staining.

• Marine use: Exterior defect removal on gelcoat or neglected fiberglass.

Directions:

1. Starting with a clean, cool surface, apply TURBO CUT™ generously, slowly buff/spread in a 2'x2' area. Then increase to run rotary buffer at 1400-2200 RPM. For the best cut to remove scratches without hazing, use a blended wool pad and avoid fast back and forth buffing.

2. Continue with FINISH CUT™ "No Swirls Compound" using the WIZARDS® WHITE FOAM CUTTING PAD

3. Finish by buffing with a WIZARDS® GRAY FINISHING PAD at 1000 RPM.

4. Detail finish to a super gloss with MIST-N-SHINE® and multi-fiber cloth