3M™ Rubberized Undercoating

$0.00

Size: 19.7oz

Features:

  • Multi-purpose undercoating may be applied to cars, truck and recreational vehicles

  • Sound deadening properties help reduce road noise

  • Anti-corrosive coating protects the undercarriage of vehicles from rust and abrasion

  • Aerosol dispenser allows for easy spray-on application

Directions:

  • Remove all rust scale, oil and grease from surfaces to be coated. Surface must be clean and dry.

  • May be applied to bare or primed metal.

  • Note: If applying to composite plastic (SMC/FRP) as a sound deadening material, sand the composite plastic surface with a medium grade abrasive prior to applying under coating, this will increase adhesion.

  • Shake can for at least 60 seconds after agitator ball moves freely. To assure that the entire contents will be dispensed, always have the dot on the can rim facing downward.

  • Hold the can 10 - 12 inches from the surface and apply a uniform coat. Allow product to dry 3 - 5 minutes, then apply a second coat. For hard to reach or small areas, use the snorkel tube with spray head.

  • After use clear valve by inverting can and spray until free of material.

  • Note: Car trunks and interior areas require special attention to remove the vapors.

Size: 19.7oz

Features:

  • Multi-purpose undercoating may be applied to cars, truck and recreational vehicles

  • Sound deadening properties help reduce road noise

  • Anti-corrosive coating protects the undercarriage of vehicles from rust and abrasion

  • Aerosol dispenser allows for easy spray-on application

Directions:

  • Remove all rust scale, oil and grease from surfaces to be coated. Surface must be clean and dry.

  • May be applied to bare or primed metal.

  • Note: If applying to composite plastic (SMC/FRP) as a sound deadening material, sand the composite plastic surface with a medium grade abrasive prior to applying under coating, this will increase adhesion.

  • Shake can for at least 60 seconds after agitator ball moves freely. To assure that the entire contents will be dispensed, always have the dot on the can rim facing downward.

  • Hold the can 10 - 12 inches from the surface and apply a uniform coat. Allow product to dry 3 - 5 minutes, then apply a second coat. For hard to reach or small areas, use the snorkel tube with spray head.

  • After use clear valve by inverting can and spray until free of material.

  • Note: Car trunks and interior areas require special attention to remove the vapors.

You Might Also Like